-
Vending machine card goods
Due to the use of the spring spiral cargo path, when the machine is shipped, the spring rotation will exert a pressing force on the product, and the pressing force has a positive and oblique pressing force. Under the action of the positive pressing force, the product is likely to trip over. It even fell. This will result in the goods under the cargo lane (below the spring);
Solution:
First, remove the jammed item, and then enter the “fault” item in the vending machine management page to select the clear card cargo failure. In the future operation, the corresponding changes should be made to the placement of the goods, mainly because the size of the goods should be as close as possible to the size of the goods lane, not too small, and no larger than the size of the cargo road spring.
-
The vending machine is out of stock, not looking for zero
The main reasons for this situation are:
1. There is no change in the changer;
2. There is a change in the changer, but the default change in the system is zero;
3. Change the card currency;
4. The dust of the banknote is too serious.
Solution:
1. Make up the change;
2. Enter the system management page to see if there is no record after the last change (the part of the vending machine needs to manually input the change amount after the change). If the quantity is 0, please modify it;
3. Unpack the banknote and take out the jammed currency;
4. Unpack the banknote, carefully clean the dust with a brush, or send it back to the factory for cleaning.
-
The vending machine puts in change, the change does not enter the change but instead deposits into the collection area.
Most of the problems occurred due to the error of the banknote system (there was no shutdown for a long time).
Solution:
After three minutes of the shutdown, enter the system management page, and then use a small stick to go into the reset button of the banknote to reset it. After inserting the small stick and pressing the reset button, you will see the light of the banknote light on and off, and then light up. Just let go) Wait a few minutes, then turn it off and restart it again to solve the problem.
-
The light of the banknote of the vending machine is not bright, or it is bright and dark, and the banknotes are placed at the same time, but the machine does not suck money.
There are two possibilities for such problems:
1. Due to foreign matter in the banknote holder;
2. The iron cash box under the banknote is not installed.
Solution:
Open the banknote device, remove the foreign matter, and then turn it on again. Or turn off the power of the machine and reinstall the iron cash box.
-
Scan code payment is successful but does not ship
Solution:
This is caused by signal instability, find the signal line, and pull the detection signal outside the freighter.